There are a couple things I'm looking for in an exhaust in order of priority.
1) Retain Center Stand
2) Increased Torque (i.e. 10%)
3) Chrome (Alough if full exhaust it could be a conservative looking titanium)
4) Smaller to reduce leg burns
5) Slipon instead of Full Exhaust
It doesn't seem that most actually post any before / after numbers. Any advice?
I was looking at the Powerbox as an example.
If you are buring your leg you are doing something wrong.
Have you seen the Staintune slipon brand posts on this forum, everyone seems to love it.
As HT mentioned, a lot of us have the Staintune slip-on exhaust. It seemingly meets all of your requirements with the exception of increasing torque by 10%. My CB might pull a bit harder with the Staintune, but I'm guessing any gains in torque are not gong to measure close to 10%. I've been very happy with the Staintune can, but then I wasn't exactly looking for any major performance gains.
How much torque does our bike have anyway?
68 ft lbs @ 5000 rpm iirc.
(09-08-2013, 07:05 AM)GaryRudolph_imp Wrote: [ -> ]There are a couple things I'm looking for in an exhaust in order of priority.
1) Retain Center Stand
2) Increased Torque (i.e. 10%)
3) Chrome (Alough if full exhaust it could be a conservative looking titanium)
4) Smaller to reduce leg burns
5) Slipon instead of Full Exhaust
It doesn't seem that most actually post any before / after numbers. Any advice?
I was looking at the Powerbox as an example.
The Tadao Power box is your best bet
It has all the requirements that you want except for how much torque it produces becuase no one has firsthand experience. Im not a fan of the Staintune because of price and looks.
I have the Ksy full exhaust and its dirt cheap.
Can you share a little more info on the Ksy system? How is the quality and fit, where do you buy it and of course sound. Any video or pictures would be appreciated as well.
I have the Ksy full exhaust and its dirt cheap.
(09-08-2013, 01:20 PM)lola_imp Wrote: [ -> ] (09-08-2013, 07:05 AM)GaryRudolph_imp Wrote: [ -> ]There are a couple things I'm looking for in an exhaust in order of priority.
1) Retain Center Stand
2) Increased Torque (i.e. 10%)
3) Chrome (Alough if full exhaust it could be a conservative looking titanium)
4) Smaller to reduce leg burns
5) Slipon instead of Full Exhaust
It doesn't seem that most actually post any before / after numbers. Any advice?
I was looking at the Powerbox as an example.
The Tadao Power box is your best bet
It has all the requirements that you want except for how much torque it produces becuase no one has firsthand experience. Im not a fan of the Staintune because of price and looks.
I have the Ksy full exhaust and its dirt cheap.
Just ordered one through Samurider so will update when I receive and install it.
The 2 Brothers slip on meets your requirements. The titanium version is about $450. It provides a very noticeable bump in torque and HP.
There are lots of videos and dyno charts on line. Its loud though, and not as pretty as the $1,200 kits.