10-02-2013, 08:47 PM
10-03-2013, 04:19 AM
(09-25-2013, 10:32 AM)silascopathic_imp Wrote: [ -> ]On British customs I ordered their 41mm fork gaiters. $32 after shipping!
Picture time!
Here us a picture of my cb and my buddy's guzzi v7
I love the look of these so much! Good purchase feelings all around. Took me 25 min to install .
![[Image: 81e5a7d0835a5db0c9e818bb48c9afa4.jpg]](https://cb1100forum.net/forum/uploads/imp/81e5a7d0835a5db0c9e818bb48c9afa4.jpg)
![[Image: b4777bd0d7adfd287074f3fd3f39f331.jpg]](https://cb1100forum.net/forum/uploads/imp/b4777bd0d7adfd287074f3fd3f39f331.jpg)
![[Image: ef08d037937ada2fd5b957540aa85373.jpg]](https://cb1100forum.net/forum/uploads/imp/ef08d037937ada2fd5b957540aa85373.jpg)
Hello, can you give me the adress where you buy those gaiters?
10-03-2013, 09:57 AM
(10-03-2013, 04:19 AM)alexkrijnsen_imp Wrote: [ -> ](09-25-2013, 10:32 AM)silascopathic_imp Wrote: [ -> ]On British customs I ordered their 41mm fork gaiters. $32 after shipping!
Picture time!
Here us a picture of my cb and my buddy's guzzi v7
I love the look of these so much! Good purchase feelings all around. Took me 25 min to install .
Hello, can you give me the adress where you buy those gaiters?
Hello, can you give me the adress where you buy those gaiters?
I ordered the same ones from the same place. It's http://www.british-customs.com
10-05-2013, 08:15 AM
10-08-2013, 04:58 AM
10-08-2013, 06:52 AM
(10-08-2013, 04:58 AM)GIXXERMAN_imp Wrote: [ -> ]Got mine on today and they look great!
Agreed. I'd love to see a picture showing the entire bike. Like that black fender. What else is going on?
10-08-2013, 06:55 AM
10-08-2013, 09:52 AM
10-08-2013, 10:35 PM
Sure!
1. put bike on center stand
2. find something to put under bike so when front wheel comes off it is stable ( i used an ammo can)
3. remove front fender and calipers
4. remove front axel and wheel
5. using a 12mm for the top fork bolts and a 14mm for the bottom, i removed them one at a time.
6. slip gaiter on to fork ( do not zip tie yet)
7. once both gaiters are on, lightly tighten fork tubes in place.
8. use front axel to make sure they are level. keep an eye on top triple tree to make sure the same amount of tube is visible.
9. i used black zip ties for the top only. ( i left bottom not zip tied because they stayed well and to prevent over stretching)
10. reassemble bike
11. step back with
in hand and marvel at your accomplishment.
1. put bike on center stand
2. find something to put under bike so when front wheel comes off it is stable ( i used an ammo can)
3. remove front fender and calipers
4. remove front axel and wheel
5. using a 12mm for the top fork bolts and a 14mm for the bottom, i removed them one at a time.
6. slip gaiter on to fork ( do not zip tie yet)
7. once both gaiters are on, lightly tighten fork tubes in place.
8. use front axel to make sure they are level. keep an eye on top triple tree to make sure the same amount of tube is visible.
9. i used black zip ties for the top only. ( i left bottom not zip tied because they stayed well and to prevent over stretching)
10. reassemble bike
11. step back with
in hand and marvel at your accomplishment.10-09-2013, 10:09 AM