The CB1100 Community Forum

Full Version: chrome meter covers for 2014 Dlx
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Is it the same part# for both, dealer says 51.00 must take 2 of the same, anyone know?
If this is the part number: 08F72-MGC-D30 it is a kit of 2 and is for the 2013 model and will not fit the 2014s.

So far as is known, the 2014 is not available yet. Well, unless they have finally been released.

Takashi said he would put them on his site too as soon as they are available.
And then I just read this thread.
http://cb1100forum.com/forum/showthread.php?tid=2903
(05-08-2014, 09:52 AM)Lord Popgun_imp Wrote: [ -> ]If this is the part number: 08F72-MGC-D30 it is a kit of 2 and is for the 2013 model and will not fit the 2014s.

So far as is known, the 2014 is not available yet. Well, unless they have finally been released.

Takashi said he would put them on his site too as soon as they are available.
And then I just read this thread.
http://cb1100forum.com/forum/showthread.php?tid=2903


Confuses the heck out of me Popgun. I don't see how it could possibly be the same kit. Look at that thick band on the 14's. The 13 band is thin. Even if they were the same diameter you'd think depth of the cups would be an issue.

I measured from the bottom of the small black band below the wide chrome band to the bottom of the instrument and it's only like 1 1/2 inches. May be optical illusion but those cups look deeper than that to me.
I think the dealer made the 2013 chrome covers fit by user a long bolt. The 2014 instrument buckets are shorter.
Retro did you put some on your. 14 deluxe ?
Popgun. & ferret. Looks like the 13 fit his 14. Do you think his bike is different gauges. I would not think so! They sure looked good on there. Do they go up higher on the 13. ? If they bottom out on the bottom why would you need a longer bolt?
Michael
Just the opposite Ridem..I think there is a gap on his between the bottom of the instrument and the bottom of the cup
Ridem,

I'd have to agree with ferret on this.
Yep you guys are correct, you can see the bolts have the wrong type of head and it looks like the longer cups are possibly touching the headlight bucketHuh
I noticed that too ss2
Good eye guys! I will wait and see if the 14 comes out Smile