The CB1100 Community Forum

Full Version: remus powercone slip-on
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hello everyone, I recently ordered a Remus Powercone slip-on muffler. It has a removable baffle. My question is, if you run the muffler with the baffle removed, do you have to have a Power Commander V? Every thing else on my bike is stock.
[Image: 491cade912a3999f78c1d0298141de50.jpg][Image: ee63d40618ffafcd4cbb408195776991.jpg]
The product information states no re-mapping or re-jetting required (optional). Does that mean with the baffle removed also?[Image: 0e7884f2e5a65611b9e7ed871b213c89.jpg]
It says right in their ad "no need to rejet/remap." However if you're looking to extract the maximum power available a PC would get you there.
Does look cool!
You won't get the drastic lean-fueling effect with an unrestricted muffler that you would on most bikes; at least I didn't with the 2Bros. But you may notice a bit of roughness in low RPMs that isn't there with the OEM kit. They really nailed the stock fueling at the factory.
Tch, tch, Spaceman. Surely it's a bit lean?
(09-22-2014, 10:24 PM)Cormanus_imp Wrote: [ -> ]Tch, tch, Spaceman. Surely it's a bit lean?

Who am I kidding, of course it's lean from the factory. Honda is simply incapable of meeting the Environmental Persecution Agency's satanic regulations without starving their engines for fuel. 2015 CBs will be hybrids, mark my words.
I have to say, that's the nicest aftermarket pipe I've seen yet (at least, to my tastes) for this bike.
Please post up pics/sound when you get it installed!